How do I undo the bathroom faucet, so I can change the washer and stop it from dripping? - stop dripping bathroom faucet
My dick looks like.
http://img49.imageshack.us/img49/2789/faucetnm3.jpg
He has not even seen a screw to give me a hint, where to start!
Monday, February 1, 2010
Stop Dripping Bathroom Faucet How Do I Undo The Bathroom Faucet, So I Can Change The Washer And Stop It From Dripping?
6 comments:
The fat part of the handle (bottom) is broken. You should be able to turn by hand. They have a Moen faucet and you should be able to get the pieces without any problems. Good luck.
Be sure to close the tap. Then look at the top of the one piece that comes out handle. If you do not find that this can be a screw behind the handle. Everything depends on manufacturing.
Perhaps one of these links.
http://www.moen.com/shared/pdf/6101pt.pd ...
http://www.moen.com/shared/pdf/T4560pt.p ...
Hope it helps.
Their handles are actually two parts deals ... Why not see any screws. Hold the bottom just above the base (the part that is thicker), then turn the handle counterclockwise, really. It should solve from there.
Her tail is still too new for washing machines. Assembly to be unscrewed to be treated. Remove remove cartridges and a good memory of home improvement or plumbing supply and exchange. The brand would be useful, but the employees, you probably know by.
keep the water will be cut under the sink, turn the handles of any pressure, behind the lever, an Allen screw. solve, will be low, the situation is on a rise in the ceiling of which Wilson is a nut. can loosen and remove. wks provide washers and check out the back together.
Post a Comment